PRODESO HEAT GRIP CABLE is a cable made up of many electrical resistors, with a length of 60 cm, connected in parallel. The cable, available in a range of lengths, is made up of a cold part and a warm one. The cold part, 2.5m length, is covered with PVC. The hot part, available in a lot of lengths, is covered with silicone. The connection cold part and hot one and the terminal junction is made impermeable by a thermo-retracting cap. The cable has a total diameter of 6.5 mm. It is composed of two conductors with a diameter of 1.13 mm each one protected by a silicone insulating sheath with a thickness of 8mm. The resistor cable is wound around the conductors, and the cable, with a voltage of 230V, develops a power of 12.5W / mt. In case of cable damage only the involved resistor stops, even if the cable is shortened the power per linear meter does not change, the cable distance should be installed every 6.2cm on a wall (2 cavities), or 9.3 cm on the floor (3 cavities).
