ETS - Stainless Steel Angle Edge Trim

Developed to provide discreet edge protection satisfying the demands of both tile protection and design aesthetics.

These profiles offer superb resistance to principal chemical and atmospheric agents and are particularly recommended to protect steps in zones such as food processing industries, breweries, dairies, hospitals and external applications.

It's smooth and non-porous surface makes it especially difficult for the adhesion and survival of bacteria and/or other micro-organisms.

Available in bespoke powder coating to any RAL number on request.

 

 

Product
Length (m) 2.5
Box Quantity 10
Depth (mm) 4.5, 7, 10
Title  
ETS Datasheet ETS Datasheet
  1. Select ETS according to tile thickness.
  2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
  3. Press the perforated anchoring leg of the ETS, into the tile adhesive and align, mechanical fix if required.
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile (the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower).
  6. Fill the joint completely with grout.

Join Our Mailing List

If you would like to receive updates and the latest news of our product launches