AHD08

In addition to the function of step edge protection the Aluminator® range offers an easy, energy efficient solution to illuminate steps. Should a local or emergency power failure occur on stairways, increasing the risk of hazard for evacuees, the Aluminator® system allows the evacuee to orientate, locate stair edges and risers, and to assist in the safe evacuation of the premises. The system requires no electrical connection, is simple to install and requires no special maintenance other than that which you would normally carry out on any similar product. Only normal illumination, daylight, fluorescent or standard tungsten filaments are required to activate its performance.

Product
W x D (mm) 71 x 55
Channel Single
Length (m) 2.46, 2.77, 3.22
Type Heavy Duty
Design Bullnose
Gauge (mm) 5
Material Aluminium
Box Quantity 20
Title  
Insert Colours Insert Colours
Nosing Tech Pack Nosing Tech Pack
AHD Datasheet AHD Datasheet
Nosing User Guide Nosing User Guide
  1. Ensure the steps are dry, clean, free of debris, level and even. 
  2. If pre-drilled use the drill holes to mark steps for drilling location. 
  3. Drill and Plug the steps. 
  4. Apply suitable adhesive to the underside of the nosing and apply nosing to the step. 
  5. Screw down the step with the appropriate size screws. 
  6. Apply insert (if separate) or insert pip to cover the screw head. 

Join Our Mailing List

If you would like to receive updates and the latest news of our product launches